OAK TREE

Oak wood has a density of about 0.75 g/cm³, great strength and hardness, and is very resistant to insect and fungal attack because of its high tannin content. It also has very attractive grain markings, particularly when quartersawn. Wide, quarter-sawn boards of oak have been prized since the Middle Ages for use in interior paneling of prestigious buildings such as the debating chamber of the House of Commons in London, England, and in the construction of fine furniture. Oak wood, from Quercus robur and Quercus petraea, was used in Europe for the construction of ships, especially naval men of war, until the 19th century, and was the principal timber used in the construction of European timber-framed buildings. Today oak wood is still commonly used for furniture making and flooring, timber frame buildings, and for veneer production. Barrels in which red wines, sherry, brandy and spirits such as Scotch whisky and Bourbon whiskey are aged are made from European and American oak.

MDF wood

Medium-density fibreboard (MDF) is an engineered wood product formed by breaking down hardwood or softwood residuals into wood fibers, often in a defibrator, combining it with wax and a resin binder, and forming panels by applying high temperature and pressure.^[1] MDF is more dense than plywood.

It is made up of separated fibers, (not wood veneers) but can be used as a building material similar in application to plywood. It is stronger and much more dense than normal particle board.

The name derives from the distinction in densities of fiberboard. Large-scale production of MDF began in the 1980s ^[

PVC

Using PVC as a Wood Alternative

PVC is one of the most versatile Landscape Supplies. Schedule 40 Pipe Lengths can be used as an alternative to all sorts of materials at home, the most common of which is wood. Wood and PVC display many similar properties, are both cheap, and both can be manipulated easily and used effectively at home. All tools that work with wood such as saws, drills, painting materials, etc. can be used just as effectively with PVC!

For instance, when cutting PVC, one can use a fine hacksaw to keep the ends even and flat. Or, one can also use conventional PVC cutters, resembling pruning shears to get the job done. More detailed instructions for Cutting PVC can be found on our resource center.

PVC can be painted in the same way as wood. The same tools for cutting are used when painting. The painting process is also described in greater detail on our resource center.

Among other qualities, PVC is quite malleable. It can be bent slightly when normal temperature, but when heated up a bit, it becomes quite workable. This provides a slight advantage over the rigidity of wood. PVC's malleability combined with its relative ease to work with allow a great range of possibilities.